Digital refractometers DR7000 series, with audit trail function
Product number:
4710162
Manufacturer:
A. Krüss Optronic GmbH
Packaging information:
Description
With these digital refractometers, the measurement is based on the determination of the limiting angle of total reflection between a sample and a prism, measured at a wavelength of 589 nm. Suitable for small sample volumes of approx. 0.3 ml. With optical sensor, temperature control, measuring electronics, evaluation electronics and touch display, the devices contain all the components needed to carry out the measurements reliably. Operation takes place directly on the device, so that a separate PC with software is not necessary.
- Internal Peltier temperature control and integrated sensor for temperature monitoring
- Pre-installed scales (refractive index and %Brix, temperature compensation for %Brix)
- Functions allowing the customer to create and edit further measurands and temperature compensations
- Up to three measurands can be measured simultaneously
- Internal memory for storing measurement results
- 1-point adjustment by the customer
- Activatable user management with three user levels
- Chemical-resistant stainless steel tray
- Sample prism made from scratch-resistant, chemical-resistant sapphire
- Interfaces: 2 x USB, 1 x RS-232, 1 x LAN
- Compliant with CFR 21 Part 11
Properties
| Accuracy: | nD ±0,0001, ±0,1 %Brix |
|---|---|
| Depth: | 360 mm |
| Dimensions (WxDxH): | 230 x 360 x 170 mm |
| Height: | 170 mm |
| IP code: | IP 20 |
| Manufacturer Article Number: | DR7200-P |
| Max. temperature: | 60 °C |
| Max. voltage: | 240 V·AC |
| Measured range: | nD 1,3000 ... 1,5800, 0 ... 95 %Brix |
| Min. temperature: | 10 °C |
| Min. voltage: | 90 V·AC |
| Power supply: | 90 ... 240 V·AC, 50/60 Hz |
| Power supply frequency: | 50/60 Hz |
| Resolution: | nD 0,0001, 0,1 %Brix |
| Temperature: | 10 ... 60 °C |
| Type: | DR7200-P |
| Weight: | 5 kg |
| Width: | 230 mm |
Skip product gallery
Digital refractometer ORL
From
€890.00*
Abbe Refractometer Model RMT
From
€667.00*
Sucrose (Brix) Standards
From
€79.10*
Refractive Index standards
From
€97.10*
Abbe refractometers, NAR-1T series / NAR-2T
From
€4,394.00*
Digital Refractometer RX-5000i / RX-5000i-Plus
From
€11,931.90*
Digital Laboratory refractometers
From
€7,799.00*
Digital Refractometer RX-5000Alpha/RX-5000Alpha Plus/RX-9000Alpha
From
€13,201.40*
Sucrose in water (Brix) standards
From
€64.15*
Digital refractometer RFM300-T
From
€6,881.70*
Refractometer Abbe 5
From
€1,897.00*
Similar products
Accurate and maintenance-free digital benchtop refractometer with 2 scales, for universal applications in the laboratory.Large multifunction display with integrated temperature displayAutomatic temperature compensation (ATC)Calibration with distilled waterAutomatic power-off after 3 minutesMean value measurements possibleUSB connection or 1 × rechargeable battery 3.7 V, 3000 mA (not included in scope of supply)Scope of supply: Digital refractometer, pipette, storage case, USB cable, power adapter, screwdriver
Laboratory refractometer for precisely measuring liquids, solids, semi-liquids and powders. Optical refraction index and Brix scale reading system, with an excellent boundary line brightness and contrast. Prism with large windows, equipped with movable shrouds to keep out light. Focussable eyepiece.Standard accessories: Calibrating glass prism, thermometer, dust cover, calibrating screw driver, wooden case.
Certified stabilized Sucrose (Brix) Standards.ISO 17025 accreditedUncertainty of measurement of 0.11 % for all Brix values at 20 °CEquivalent Nominal Refractive Index values from ICUMSA published tables reported on Certificate of AnalysisCompatible with any brand of Refractometer12 month shelf lifeProvided in high quality HDPE 15 ml dropper bottles
Certified standards with values expressed in Refractive Index (R.I) units nD.ISO 17025 accredited with an uncertainty of measurement up to ±0.00014 nD units at 20 °C12 month shelf lifeAqueous basedCompatible with any brand of refractometerConvenient high quality 15 ml HDPE dropper bottle
Type NAR-1T-Liquid: The Abbe Rerfactometer for liquid sample measurement only. It has the Refractive Index Scale and the Brix scale, and it comes with D-line (589nm) light source. Calibration can be achieved using distilled water.Type NAR-1T Solid: Abbe Refractometer for solid sample measurement (it can also be used to measure liquid samples). It has the Refractive Index Scale and the BRIX scale, and it comes with D-line (589nm) light source.Type NAR-2T: Designed for use with substances requiring measurement at high temperature.
The most accurate refractometer in the world is now even more stylish, smart, and functional. Featuring intuitive touch screen technology, the new RX-i series makes navigation and selection a breeze. The RX-5000i measures with the same accuracy level as the RX-5000alpha ±0.03% Brix and ±0.00004nD. The RX-5000i-Plus measures with the same accuracy level as the RX-5000alpha-Plus ±0.010% Brix and ±0.00002nD. The RX-i series come with newly added functions, such as USB flash drive and self-diagnosis capability. These products come standard with a 2 year warranty. The warranty period can be extended to 3 years if the product is registered with ATAGO. FDA 21 CFR Part 11 Software Included in Standard DeliveryModes:Displays the measurement value once the sample reaches the target temperatureMeasures refractive index and temperature at fixed intervals and displays the estimated measurement value at the target temperatureThe thermo-module can be turned off. Without temperature control, the measurement value is displayed in 4 seconds after the START key is pressedDisplays the measurement value once a certain level of sample stability is achieved.Only on the RX-5000i-Plus: Measuring of Low Brix Liquid Samples (such as teas), obtaining highly repeatable results (0.010% Brix).
The DR6000 refractometers work with hardly any service and are very quiet, good for long-term work in the lab. Very easy to operate due to an intuitive touch screen. Optional connections to printer, PC or network provide highest flexibility. High precision through integrated peltier thermostat. Flow measurement cells enable continuous measuring. The devices are used wherever a substance in watery solutions has to be measured.Areas of usage: beverage, chemistry, pharma, food, paper, sewerage, textile, petrochemistry, cosmetics.
The digital refractometers are reliable and cost effective instruments with a measurement accuracy of ±0.03 % Brix and ±0,00004 nD. An excellent alternative to traditional Abbe refractometers and essential to any QC / QA lab. Equipped with 60 programmable user scales and 4 level password protection feature.RX-5000 Alpha and RX-5000Alpha Plus are equipped with a Peltier thermo module. RX-5000Alpha Plus has the highest accuracy of the RX series. All refractometers can be connected with an optional printer.
Certified reference material according to ISO 17034 and ISO 17025 for the calibration or validation of appropriate test methods for the determination of the Brix value. The product has a shelf life of 20 weeks and is manufactured in accordance with ICUMSA guidelines. The product measurement uncertainty is computated on a batch to batch basis and is guaranteed never to exceed ±0.15 °Brix.Ready to useCan be used with any refractometerProvided in a dropper bottle
High-precision measuring device with Peltier temperature control for demanding applications in the food, beverage, and chemical industry. SMART temperature stability, RFID user identification, and application-specific, pre-programmed methods simplify routine analyses. Measurements can be performed quickly and reliably in Brix, refractive index (RI), or up to 100 user-defined scales.Flat prism surface facilitates cleaningWide beam scan for non-homogeneous samplesBrix precision to three decimal placesData memory for over 8000 readingsMenu with PIN protectionDual display function: display of Brix or RI values alongside the equivalent sucrose SG resultUSB (A), USB (B), and Ethernet interfaceOutput as secure PDF possibleUSB "Back-up & clone"Remote access for diagnostics and maintenanceSupports FDA Regulation 21 CFR Part 11High-resolution 7" HD touchscreen display
The refractometer measures both the refractive index over a large measuring range and the Brix value, and is suitable for applications in small laboratories with low sample throughput, schools, colleges, and universities. The prism temperature is monitored electronically and shown on the integrated digital display. Dispersion measurements of solids such as glass, contact lenses, and fibre optics can be performed according to standard procedures.Complete measuring range 0 to 95 °BrixWater bath connections enable prism temperature controlOptional LED light source for mounting on the instrument baseBattery operation 1 x 1.5 VHard case for transport and storageSupplied with glass calibration plate and contact liquid