Measuring cylinders

ISOLAB Laborgeräte GmbH

Measuring cylinders, PP, tall form, class B, blue graduated

Tall form, highly transparent, with blue graduations, hexagonal base, calibrated to contain (IN). Tolerances class B according to DIN 12681 / ISO 6706. Exposure to temperatures above 60 °C may effect accuracy. Cleaning up to max. 60 °C is recommended to preserve marks and inscriptions.

From €5.30*

ISOLAB Laborgeräte GmbH

Measuring cylinders, borosilicate glass 3.3, tall form, class A, blue graduated

Conformity certified with batch IDDIN EN ISO 4788Hexagonal foot with spoutCalibrated to contain (IN)Inscriptions are printed with blue enamelBatch certificate can be downloaded from website

From €11.50*

Hirschmann Laborgeräte GmbH

Measuring cylinders, DURAN®, tall form, class B, blue graduation

IN (TD) calibrated. With spout and hexagonal glass base, short line. Tolerances better than class B requirements. Graduation in durable blue enamel, acc.to DIN EN ISO 4788.

From €10.70*

VITLAB GmbH

Measuring cylinders, PP, tall form, class B, blue moulded graduations

Highly transparent. With easily readable, raised, embossed blue scale and ring marks at the primary scale points. Calibrated 'In'. Class B tolerances according to DIN 12681 / ISO 6706. Hexagonal base with bottom studs provides high stability. Thermal stress up to 80ºC does not cause tolerance limits to be permanently exceeded. To preserve markings, do not clean at temperatures exceeding 60ºC.Food-safe product according to regulation (EU) No. 10/2011.

From €4.30*

Hirschmann Laborgeräte GmbH

Measuring cylinder with plastic socket, DURAN®, class A, blue graduation

With spout, removable plastic socket and protective ring. Blue graduation marks, calibrated for IN, acc. to DIN EN ISO 4788.

From €12.00*

Hirschmann Laborgeräte GmbH

Measuring cylinders, DURAN®, tall form, class A, blue graduation

IN (TD) calibrated. With spout and hexagonal glass base. Main point ring graduation. With dated batch identification. Declaration of conformity acc. to DIN 12600. Graduation in durable blue enamel, acc.to DIN EN ISO 4788.For those products batch calibration reports, which are free of charge, can be generated and printed on www.hirschmannlab.com. Additional single calibration reports or DAkkS certificates (former DKD calibration reports) are available. Also available with dated batch identfication acc. to USP (US Pharmacopeia).

From €12.90*

BRAND GMBH + CO.KG

Measuring cylinders, borosilicate glass 3.3, low form, class B, amber graduations

Silberbrand EternaDIN EN ISO 4788With spout and hexagonal footGraduations and inscriptions in Eterna permanent amber stainCalibrated to contain IN

From €56.00*

Hirschmann Laborgeräte GmbH

Measuring cylinders, DURAN®, low form, class B, amber stain graduation

IN (TC) calibrated. With spout and hexagonal glass base. Tolerances better than class B requirements. Short line graduation. With durable amber stain graduation, DIN EN ISO 4788.

From €10.20*

ISOLAB Laborgeräte GmbH

Measuring cylinders, Borosilicate glass 3.3, tall form, class B, white graduation

Flawless spout design assures pouring without any drips. Thick and durable polypropylene base reduces the risk of breakage during use and cleaning. Base perfectly fits the cylinder body and can easily be dismantled.

From €17.20*

BRAND GMBH + CO.KG

Measuring cylinders, PMP, tall form, class A, blue graduations

Clear. Exposure to temperatures up to 121 ºC (autoclaving) will not cause permanently exceeded error limits. Cleaning at temperatures below 60 °C is recommended to preserve graduations and inscriptions. Class A tolerance is not affected even after 20 washes and 10 autoclave treatments. (DIN 12681 requires: 10 washes and 3 autoclave treatments). Supplied with batch number and one batch certificate per packing unit. On request, they are also available with an individual certificate, USP individual certificate or DAkkS calibration certificate. Batch and individual certificates can also be downloaded at the supplier's website.DIN 12681 and ISO 6706DE-M markingWith blue printed graduations and inscriptions

From €9.65*

Kartell S.p.A.

Measuring cylinders, PMP, tall form, class B, white graduations

Clear. Conforms to ISO 6706 - 1981 (E).Good chemical resistanceFor liquids up to 170 °CPentagon baseFood-safeAutoclavable

From €7.60*

Hirschmann Laborgeräte GmbH

Measuring Cylinder with Plastic Socket, DURAN®, class B, Blue Graduation

With spout, removable plastic socket and protective ring, graduation marks, calibrated for IN, DIN EN ISO 4788.

From €9.70*

LLG Labware

LLG-Measuring cylinders, borosilicate glass 3.3, tall form, class A

Tall form. Conformity certified with batch ID.DIN EN ISO 4788With hexagonal base and spoutBlue graduation

From €19.60*

VITLAB GmbH

Graduated cylinders, PP, class B, low form, raised scale

Highly transparent. With a raised scale and ring marks at the primary scale points, calibrated In'. Products individually packaged in PE bags, labelled with the article number, description and EAN code. Thermal stress up to 80°C does not cause tolerance limits to be permanently exceeded. Food-safe product according to regulation (EU) No. 10/2011.

From €2.70*

ISOLAB Laborgeräte GmbH

Measuring cylinders, PP, tall form, class B, moulded graduations

Manufactured from ultra clear, virgin polypropylene and its thick walls eliminate distortion.They offer high transperency, chemical resistance and remarkable heat tolerance.They meet the highest quality standards according to DIN 12681 and ISO 6706.Individually calibrated through automatic calibration process carried out by robots.Permanent quality control through all steps eliminate possible deviations from nominal values.Cylinders are calibrated to contain (In) and the tolerances are according to DIN/ISO Class "B" standards.Graduations are embossed and specially designed for plastic and resistant to 60°C.For consistent accurracy, polypropylene measuring cylinders should not be used with liquids over 60°C and should not be kept under direct sunlight or overheated conditions.

From €2.20*

DWK Life Sciences GmbH (Duran)

Measuring cylinders DURAN®, tall form, class A, blue graduations

Calibrated to contain (IN). With spout, main point ring graduations and hexagonal base. DIN EN ISO 4788. Incl. batch certificate and certificate of conformity. The batch certificates can be downloaded from the manufacturer's website.

From €12.90*

Thermo Elect.LED GmbH (Nalge)

Measuring cylinders Nalgene™, PP

Transparent. Lightweight construction. Class B. Fulfil requirements of ISO 6706. Large, round foot with moulded rib for stability. Non-wetting. Calibrated to contain / deliver at 20°C.

From €5.70*

LLG Labware

LLG-Measuring cylinders, borosilicate glass 3.3, low form, class B

Low form. Calibrated to contain (TC, IN).DIN EN ISO 4788With hexagonal base and spoutAmber graduation

From €14.50*

Kartell S.p.A.

Graduated cylinders, PP, class B, embossed scale

Tall form, with spout, high clarity. Conforms to ISO 6706 - 1981 (E). Calibrated to contain (TC, In). Exposure to temperatures up to 80°C will not cause permanent exceeding of tolerance limits! Cleaning temperature below 60°C is recommended to preserve marks and inscriptions. Food-safe, autoclavable.

From €8.20*

LLG Labware

LLG-Measuring cylinders, borosilicate glass 3.3, tall form, class B

Tall form.Detachable hexagonal baseWith spout and protection collarWhite graduation

From €14.50*

Kartell S.p.A.

Measuring Cylinders, PP, Short Form, Moulded Graduations

Low form, circular base. Excellent chemical resistance. Moulded graduation. Wide base for high stability. Food-safe, autoclavable.

From €5.50*

VITLAB GmbH

Measuring cylinders, PMP, class A, KB

Tall form. Highly transparent. DE-M marked. Ring marks at the major graduation points. The conformity certified cylinders are delivered with a batch certificate which includes batch number and the actual determined nominal capacity with indications of the test conditions. Batch number and year of fabrication is printed on each cylinder. The concluding deviations to the nominal capacity are clearly within the required tolerances of class A acc. to DIN 12681 and ISO 6706. Measuring cylinders made of PMP withstand exposure to temperatures up to 121°C (autoclaving) without permanent loss of tolerance. On request also with DAKKS calibration certificate or single certificate.

From €9.65*

Hirschmann Laborgeräte GmbH

Measuring cylinders, DURAN®, tall form, class A, amber stain graduation

IN (TC) calibrated. With spout and hexagonal glass base. Main point ring graduation. With dated batch identification. Declaration of conformity acc. to DIN 12600. With durable amber stain graduation, acc. to DIN EN ISO 4788.For those products batch calibration reports, which are free of charge, can be generated and printed on www.hirschmannlab.com. Additional single calibration reports or DAkkS certificates (former DKD calibration reports) are available.

From €12.90*

Hirschmann Laborgeräte GmbH

Measuring cylinders, DURAN®, tall form, class B, amber stain graduation

IN (TC) calibrated. With spout and hexagonal glass base, short line. Tolerances better than class B requirements. With durable amber stain graduation, DIN EN ISO 4788.

From €10.70*

Bohemia Cristal

Measuring cylinders, borosilicate glass 3.3, tall form, class A, brown graduation

With spout and hexagonal base. ISO 4788.

From €18.50*

VITLAB GmbH

Measuring cylinders, PP, tall form, class B, moulded graduations

Tall form. Highly transparent. With a raised scale and ring marks at the primary scale points, calibrated In'. Class B tolerances according to DIN 12681 / ISO 6706. Hexagonal base with bottom studs provides high stability. Thermal stress up to 80ºC does not cause tolerance limits to be permanently exceeded. Food-safe product according to regulation (EU) No. 10/2011.

From €2.60*

Hirschmann Laborgeräte GmbH

Measuring Cylinder, DURAN®, class A, Blue Graduation

Schellbach stripe for enhanced legibility and exact meniscus configuration, acc. to DIN EN ISO 4788. Calibrated for IN.Certified conformityWith dated batch identificationMain point ring graduationWith spoutHexagonal glass socketAdditional batch certificates can be generated and printed at any time free of charge at www.hirschmannlab.com.

From €17.40*

BRAND GMBH + CO.KG

Measuring cylinders, borosilicate glass 3.3, tall form, class A, brown graduated

All Blaubrand® cylinders are supplied with batch number and an accompanying batch certificate in the original packaging. On request, they are also available with an individual certificate, USP individual certificate, or DAkkS calibration certificate. BLAUBRAND® ETERNADIN EN ISO 4788DE-M markingGraduations and inscriptions in ETERNA amber stainCalibrated to contain (IN)Ring marks at major graduationsWith spout and hexagonal base

From €24.90*

BRAND GMBH + CO.KG

Measuring cylinders, borosilicate glass 3.3, low form, class B, amber graduations

Silberbrand EternaDIN EN ISO 4788With spout and hexagonal footGraduations and inscriptions in Eterna permanent amber stainCalibrated to contain IN

From €20.00*

BRAND GMBH + CO.KG

Measuring cylinders, borosilicate glass 3.3, tall form, class B, amber graduation

Silberbrand Eterna. To DIN EN ISO 4788. With spout and hexagonal foot. Graduations and inscriptions in Eterna permanent amber stain. Calibrated to contain (IN).

From €20.40*

BRAND GMBH + CO.KG

Messzylinder, PMP, hohe Form, Klasse A, blau graduiert, mit DAkkS-Zertifikat

Glasklar. Thermische Belastungen bis 121 °C (Autoklavieren) bewirken keine bleibende Überschreitung der Fehlergrenze. Um die Graduierung zu schonen, wird die Reinigung bis max. 60°C empfohlen. Die Messzylinder Klasse A zeichnen sich durch eine sehr geringe Streuung der Messwerte aus. Die Klasse AToleranzen wurden auch nach 20 mal waschen und 10 mal autoklavieren eingehalten. (DIN 12681 fordert: 10 mal waschen und 3 mal autoklavieren). Geliefert mit Chargennummer und einem beiliegenden Chargenzertifikat pro Originalpackung. Auf Anfrage auch mit Einzelzertifikat oder USP-Einzelzertifikat erhältlich. Das Chargenzertifikat sowie Einzelzertifikate finden Sie auch auf der Webseite des Herstellers als Download.DIN 12681 und ISO 6706DE-M gekennzeichnetMit blau gedruckter Graduierung und Beschriftung

From €75.40*

BRAND GMBH + CO.KG

Messzylinder, PMP, hohe Form, Klasse A, blau graduiert, mit Einzelzertifikat

Glasklar. Thermische Belastungen bis 121 °C (Autoklavieren) bewirken keine bleibende Überschreitung der Fehlergrenze. Um die Graduierung zu schonen, wird die Reinigung bis max. 60 °C empfohlen. Die Messzylinder Klasse A zeichnen sich durch eine sehr geringe Streuung der Messwerte aus. Die Klasse A Toleranzen wurden auch nach 20 mal waschen und 10 mal autoklavieren eingehalten. (DIN 12681 fordert: 10 mal waschen und 3 mal autoklavieren). Geliefert mit Chargennummer und einem beiliegenden Chargenzertifikat pro Originalpackung. Auf Anfrage auch USP-Einzelzertifikat oder DAkkS-Kalibrierschein erhältlich. Das Chargenzertifikat sowie Einzelzertifikate finden Sie auch auf der Webseite des Herstellers als Download.DIN 12681 und ISO 6706DE-M gekennzeichnetMit blau gedruckter Graduierung und Beschriftung

From €71.00*

BRAND GMBH + CO.KG

Measuring cylinders, PMP, tall form, class A, blue graduations

From €18.50*

BRAND GMBH + CO.KG

Measuring cylinders USP, borosilicate glass 3.3, tall form, class A, blue graduated

DIN EN ISO 4788, DE-M marking. Calibrated to contain (IN). Ring marks at major graduations. Marks and inscriptions in high contrast blue enamel. With spout and hexagonal base. Incl. USP batch certificate. On request, also available with USP individual certificate.

From €28.10*

BRAND GMBH + CO.KG

Measuring cylinders USP, borosilicate glass 3.3, tall form, class A, blue graduated

Price on request

BRAND GMBH + CO.KG

Measuring cylinders, PP, tall form, class B, blue graduated

DIN 12 681 and ISO 6706. Calibrated to contain (IN). Cleaning up to max. 60 °C is recommended to preserve marks and inscriptions.

From €5.35*

Filter products