UV replacement lamps for water purification systems Barnstead™

Filter for pressure-resistant behropur® mixed-bed ion exchangers. Transparent casing. Once added to the ion exchanger, it completely retains even the finest particles and protects your high-quality equipment. Due to the transparent casing of the FG 130, you can see the state of the filter insert at any time and at a glance.Depending on the requirements, you can use a universal filter (5µ) or a carbon filter (20µ). Downstream filters may only be used on pressure-resistant behropur® ion exchangers. Pressure-free exchangers are destroyed by the counter pressure. It could also subsequently result in expensive damage.FG 130 behropur® filter housing for filter inserts with a length of 5". Transparent casing made of PP. Connections ¾", maximum operating pressure 8bar, max. temp. 50°CFE 130 behropur® filter insert, PP, 5µ, length 5", max. pressure 6bar, max. temp. 80°CAF 130 behropur® filter insert, carbon, 20µ, length 5", max. pressure 6bar, max. temp. 50°C

* Interval of exchanges depends on raw water quality and throughput

For ultra pure water type I.Ultra pure water of the highest quality for analytical and life science applications in the laboratory. With the standard control and monitoring unit OptiFilltouch, laboratory vessels can be filled conveniently and precisely. The recirculation function prevents the growth of biofilms.Compact designCan be used with deionised waterDispenser pivotable up to 170°Digital control and monitoring unit OptiFilltouch with colour touch displayReal-time TOC monitoringAdjustable limit values for conductivity and TOCInnovative monitoring and display of cartridge capacityWithdrawal volume individually adjustablePermanent data storage of all quality parametersPassword access and error memory3 languages selectable: DE, EN, FRRS232 and USB interfaceLeakage sensorIntegrated pressure reducerAutomatic voltage adjustmentCan be operated with laboratory glovesApplications:OmniaPure xstouch UV-TOC: Ultra trace analysis, ICP-MS, HPLC, TOC analysisOmniaPure xstouch UV-TOC/UF: Molecular and microbiology, cell culture mediaScope of supply: Ultra pure water system, pre-treatment cartridge, ultra pure water cartridge, sterile filter capsule (0.2 µm)Ultra pure water output:Up to 2 l/minDispensing volume:0.05 ... 25 lResistivity at 25 °C:18.2 MΩ x cmConductivity at 25 °C:0.055 µS/cmBacteria (with filter):0.01 CFU/mlParticles (with filter):1/mlRNase (with UF module):1 pg/mlDNase (with UF module):5 pg/mlProteases (with UF module):0.15 µg/lFeed water conductivity at 25 °C:100 µS/cmDimensions incl. OptiFilltouch dispenser (W x D x H):240 x 435 x 530 mmWeight incl. OptiFilltouch dispenser:14 kgPower supply:90 ... 240 V, 50 ... 60 Hz

With high-performance resinWith foam insertSecure grip due to flutingSuitable for conductivity meters with 4 and 8 LEDs

For the separation of particles and microorganisms from pure water. The filter can be installed at the tapping points of water treatment systems.High water flowHydrophilIncl. quality certificateHousing Material:SANInlet connection:1/4"Outlet connection:8 mm hose olive with protective bell

The purification pack, for use with the Direct-Q® 3 system, contains two cartridges for producing ultra-pure water from tap water.Cartridge 1: Pre-treatment (activated carbon and depth filter) and reverse osmosis membrane (RO)Cartridge 2: Ultrapure grade mixed bed ion exchange resin

The non-pressurised cartridges, which are suitable for a daily requirement up to 15 litres, are simply replaced after a prolonged period of service. A filter system prevents any resin from escaping.Scope of delivery DS 450: incl. analogue conductivity meter, set of hoses and wall mount.Scope of delivery DS 750: incl. analogue conductivity meter and set of hoses.Specifications:Pure water quality:0,1 ... 20 µS / cmMax. water temperature:30 °CConnection:R ¾"Power supply:230 V / 50 ... 60 Hz* At 10° total dissolved solids