Tubing PharMed® for LLG-uniPERISTALTICPUMP 3
Product number:
6263554
Manufacturer:
LLG Labware
Packaging information:
Length:
167 mm
Width:
32 mm
Height:
7 mm
Weight:
0.008 kg
Description
With connector and Tube Clip.
Properties
| Ext. Ø: | 9.6 mm |
|---|---|
| Int. Ø: | 6.4 mm |
| Manufacturer Article Number: | 6263554 |
| UNSPSC: | 41105108 |
Skip product gallery
Peristaltic pump tubing, Tygon® LMT-55 with 2 colour-coded bridges
From
€67.10*
Peristaltic pump LLG-uniPERISTALTICPUMP 1
From
€630.50*
Magnetic drive pump, 15 W
From
€191.90*
Nominal tubing for pumps, Tygon® LMT-55 without collars
From
€83.20*
Peristaltic pump LLG-uniPERISTALTICPUMP 3
From
€739.70*
Pump drive Hei-FLOW Core 600
From
€2,699.00*
Single-channel Pump Heads SP quick for Pump drives Hei-FLOW
From
€574.00*
Peristaltic pumps Reglo ICC
From
€3,450.00*
Pump drive Hei-FLOW Ultimate 120
From
€3,859.00*
Similar products
With 2 colour-coded bridges (international standards). Shore: 55. Fits most common peristaltic pump models, e.g. Verder, Ismatec, Watson-Marlow, IKA and Heidolph. Standard tubing, transparent. Length 380 mm. Long working lifespan. Good resistance to acids and alkalis. Food-safe.
The extra compact peristaltic pump. Ideal for continuous dosing applications. Space-saving, robust and with a wide range of easily exchangeable pump heads.Stable flow ratesCompact designReversible working directionPump heads easily exchangeableVarious pump heads with different hose diameters available as accessoryLow power consumptionCorrosion-resistant ABS housingOLED display for indication of speed and working directionWorking temperature range from 0 to 40 °CMax. humidity 80 %Scope of supply: Pump, pump head, Pharmed® hose connectors 3 mm ID, 5 mm AD
These new magnetic drive pumps are designed for pumping acids, bases, mixtures of acids and bases, solvents, photochemicals into alkali stripping baths, galvanic baths, as well as radioactive, sterile, expensive or highly corrosive liquids. The pumps are sealless. The impeller is driven by the magnetic force of the outer magnets, therefore no mechanical seal is required. As the pump housing is hermetically sealed no leaks can occur. The use of high performance, permanent magnets, ensures high transmission forces even at elevated temperatures.viscosity up to 20 mPaspump complete with flanged-to motorMotor 230 V, material PP (fibre-glass reinforced), stainless steel (shaft), Viton® (O-ring), tubing connection 14 mm
Transparent. Shore: 55. Fits most common peristaltic pump models, e.g. Verder, Ismatec, Watson-Marlow, IKA and Heidolph. Long working lifespan. Good resistance to acids and alkalis. Food-safe.
The peristaltic pump with high pumping capacity. Ideal for continuous dosing applications. Space-saving, robust and with stable flow rate.High pumping capacity of 398 ml/minReversible working directionHose connectors easily exchangeableLow power consumptionCorrosion-resistant ABS housingOLED display for indication of speed and working directionWorking temperature range from 0 to 40 °CMax. humidity 80 %Scope of supply: Pump, pump head, Pharmed® hose connectors 6,4 mm ID, 9,6 mm AD
Feed pump for standard applications. The speed is adjustable with the analog control knob and stays constant even under changing loads.Feed direction reversibleFor safety in unattended continuous operation, the motor will be switched off in case of an overload situation to prevent overheatingPump heads with convex rollers for cell protection are available for use in cell biologyThe flow rate depends on the used pump head. The pump head is not included. Please order separately.This pump drive is only suitable for use with single-channel pump heads.
Fast and convenient tube changesLow pulsation due to 5 roller systemPump head features ball bearingsRollers made of stainless steelFor tubes with a 1.6mm or 2.5mm wall thickness (wt)Depending on drive and tubing, the flow rate ranges from 0.38 to 3436 ml per minute
Independent 4-Channel Control PumpIncreased efficiencyControl of complex pump applications with only one pumpControlled by computer or directly through the control panel on the pumpContinuous pumping and precise dosingFlexible bi-directional flow direction in each channelSelf-primingEspecially for viscous or foaming liquids, also when containing particles or live cellsContamination-free pumping even under sterile conditions
Dosing and Feeding pumps for reproducible results. Flow characteristics in combination with various tubing diameters are pre-programmed for accurate flow rate numbers. With freely selectable process parameters.Speed, direction of rotation and on / off function is controllable with an analog interface or digital with built-in RS232 interfacePre-programmed flow characteristics are shown in the displayDigital read-out of Speed, Tubing diameter, Flow rate, Dosing volume, Interval dosing, Pause functionWith buttons for selecting all process parametersEasy calibration of flow volume and flow rateSmooth start operation prevents from spills and splashing mediaA press of the max button accelerates the filling and draining of the tubingFor safety in unattended continuous operation, the motor will be switched off in case of an overload situation to prevent overheatingOptional foot switch to operate pump drive in closed fume hoods and to facilitate filling operationsPump heads with convex rollers for cell protection are available for use in cell biologyThe pump head is not included. Please order separately.With an optional pump head adapter the Hei-FLOW Ultimate 120 can be upgraded for multi-channel operation.
Skip product gallery
Pipette tips, bulk, in reclosable bags, non-sterile
From
€20.10*
Customers also viewed
Pipette tips and filter tips are manufactured under monitored cleanroom conditions and are automatically packaged. No parting agents or demolding aids are used. Palletised tips and filter tips up to 1250 μl are free of DNA, DNAse, RNase, endotoxins and ATP.Batch number is printed on every bagRaw materials are free from DiHEMDA und OleamidThey are tested for BRAND pipettes and many pipettes from other manufacturersAutoclavable at 121 °C (2 bar), acc. DIN EN 285