Transport Trolley, stainless steel
Hupfer Metallwerke GmbH&Co.KG
Product number:
6290737
Manufacturer:
Hupfer Metallwerke GmbH&Co.KG
Packaging information:
Weight:
20 kg
Description
Transport trolley made of stainless steel. Rugged construction made from two tubular steel bar push handles, Ø 25 mm with welded deep drawn shelves with elevated perimeter flange inbetween. Shelves are bevelled by 35 mm all over, with flat safety return to the inside. Chassis with 4 swivel castors, 2 of them with brake, Ø 125 mm, antistatic. Massive plastic bumper protect against damage.
| Specifications | |
| Max. load per shelf: | 40 kg |
| Shelf dimensions: | 800 x 500 mm |
| External dimensions (W x D x H): | 895 x 595 x 950 mm |
Properties
| Description: | 3 shelves, stainless steel case, 4 wheels |
|---|---|
| Load capacity kg: | 120 |
| Manufacturer Article Number: | SWVARIANTE 8X5/3 |
Skip product gallery
From
€339.00*
Other customers also bought
LLG Labware
LLG Labware
LLG-Trolleys, Stainless Steel
Made of CNS 18/10, material no. 1.4301, with micro-polished surface. All shelves are produced with an all round raised profile edge. This prevents anything from slipping over the edge. The shelves are welded to the car. The load capacity per shelf is 80 kg. A noise-insulation mat is mounted on the bottom side of each shelf. The round tubes at the front edges are used as handgrips.The trolleys are equipped with galvanized steel castors (4 swivel castors, 2 with brakes, castor diam. 125mm) which are inserted in the tubular frame. Wall bumpers made of plastic (polyamide) on all four corners protect against damage.
Skip product gallery
Cleanroom Tables with Perforated Worktop
From
€1,075.40*
Cleanroom Transport Trolley
From
€1,195.10*
Dispenser box
From
€393.30*
Cleanroom Tables with a Smooth Worktop
From
€1,034.60*
Cleanroom Racks
From
€1,201.80*
Similar products
Clean room worktable consisting of worktop and underframeMaterial stainless steel (1.4301 / AISI 304)Table top made of 1.5 mm thick stainless steel 42 mm bevelled on all sides, 12 mm of which 15 ° after folded inside Functional surfaces in KEK-Finish Dimension punching (ø10 mm in the grid 15 x 15 mm) to support the laminar flow of air depending on design and dimensions stabilized by reinforcementBase frame made of square tubesGround floor with perforated surface dimension punching (ø10 mm in the grid 15 x 15 mm) firmly weldedFloor leveling
Material stainless steel (1.4301 / AISI 304)Functional surfaces in KEK-FinishShelves with a smooth surface or shelves with punched holes (ø 10 mm in 15 x 15 mm grid) to support the laminar flow of airFirmly weldedStabilized by reinforcement depending on design and dimensionsSquare profiles closed at the top with plastic caps4 castors electrically conductive, 2 of them lockable
Material stainless steel (1.4301 / AISI 304)Functional surfaces in KEK-FinishTo dispense ofdisposable items (hoods, gloves, etc.)1 - 4 boxesHinged lid with bow handle for fillingViewing slots on the front to monitor the filling levelEmbossed removal openingRemovable drip tray arranged under the removal opening2 mounting holes on the back for wall mounting
Clean room worktable consisting of worktop and underframeMaterial stainless steel (1.4301 / AISI 304)Table top made of 1.5 mm thick stainless steel42 mm bevelled on all sides, 12 mm of which 15 ° after folded inside Functional surfaces in KEK-Finish smooth surface depending on design and dimensions stabilized by reinforcementBase frame made of square tubesGround floor with smooth surface firmly weldedFloor leveling
Cleanroom racks consisting of base frame and welded in shelves.Material stainless steel (1.4301 / AISI 304)Functional surfaces in KEK-FinishBase frame made of square tubeupper ends closed with plastic capsFloor leveling with disc feets made of CNS (+/- 10 mm)Shelves, folded on all sidesfirmly weldedsmooth surfacefor perforated version: Dimension punching ø 10 mm in 15 x 15 mm grid to support the laminar flow of airdepending on design and dimensions stabilized by reinforcement