Test tube racks, OneRack®, POM, half size
Product number:
6256111
Manufacturer:
Heathrow Scientific LLC
Packaging information:
Length:
112 mm
Width:
109 mm
Height:
87 mm
Weight:
0.056 kg
Description
Tough and more highly resistant to acids, bases, solvents and heat. These durable racks are molded in a single, continuous piece so no assembly required and there are no detachable pieces.
- Molded in alpha-numeric grid
- No floating in water baths
- Flat labeling area
- Fiberglass-reinforced polyoxymethylene (POM)
- Good chemical resistance
- Autoclavable
Properties
| Autoclavable: | Yes |
|---|---|
| Colour: | Green |
| Depth: | 110 mm |
| Dimensions (WxDxH): | 110 x 110 x 85 mm |
| For vessels: | 15-50 ml |
| For vessel Ø: | 30 mm |
| Height: | 85 mm |
| Manufacturer Article Number: | HS27505C |
| Material: | POM |
| Max. temperature resistance: | 121 °C |
| Min. temperature resistance: | -40 °C |
| No. of positions: | 9 |
| Temperature resistance: | -40 ... 121 °C |
| UNSPSC: | 41122804 |
| Width: | 110 mm |
Skip product gallery
From
€18.10*
From
€25.30*
Other customers also bought
Heathrow Scientific LLC
Heathrow Scientific LLC
Test tube racks OneRack®, PP
Tough and more highly resistant to acids, bases, solvents and heat. These durable racks are molded in a single, continuous piece so no assembly required and there are no detachable pieces.Molded in alpha-numeric gridNo floating in water bathsFlat labeling areaGood chemical resistanceFurther colours available on request.
Heathrow Scientific LLC
Heathrow Scientific LLC
Test tube racks, OneRack®, POM
Tough and more highly resistant to acids, bases, solvents and heat. These durable racks are molded in a single, continuous piece so no assembly required and there are no detachable pieces.Molded in alpha-numeric gridNo floating in water bathsFlat labeling areaFiberglass-reinforced polyoxymethylene (POM)Good chemical resistanceAutoclavable
Skip product gallery
Test tube racks, stainless steel
From
€61.50*
Microtube Storage Boxes, PP, 50-/100-Well
From
€6.20*
Test tube racks, wire/nylon
From
€61.50*
LLG-Test tube rack, PP
From
€12.60*
Tube racks, PP
From
€19.60*
Test tube racks, PP
From
€15.00*
Microtube racks, PP
From
€12.20*
Rack for centrifuge tubes, PP
From
€15.10*
Tube rack, PP
From
€11.90*
Microtube racks, PP, 80-Well
From
€14.00*
Microtube racks, PP, 96-Well, set
From
€118.90*
Similar products
Corrosion resistant, stainless steel wire. Electrochemically polished. Opening size 18 x 18mm. Mesh grid levels are positioned at the top and 30mm above the base.
Autoclavable. Compact storage box has angled front slot for easy access to tubes. Rugged, polypropylene box has durable three-point hinges, snapping clasp for secure closure, moulded grid lines on lid, imprinted coordinates on bottom of base and imprinted and raised coordinates on tube wells. Ideal for sample or case study storage.Holds 1.5 ml to 2.0 ml microtubes. Resist storage temperatures from -80 to 121 °C.
Wire with white nylon coating. 3-tier design , second tier approximately 30 mm high. Opening size 18 x 18 mm. Temperature resistant up to 80 °C max.
Made of PP. Stackable. Supplied in three parts and are easy to assemble. Alphanumeric grid referenced on top tier for easy identification of samples. Can be used in water baths. With large lateral marking area. Autoclavable.
Will not float. Alphanumeric grid referenced on top tier for easy identification of samples. Stackable when empty. Can be used in freezers or water baths. Autoclavable at 121°C for 20 min.
For tubes up to 18mm in diameter. Autoclavable and unbreakable. Can be dismantled. Can be recycled.
Grey. Numbered positions for 20 x 1.5 ml microcentrifuge tubes. Autoclavable (121 °C).
Suitable to hold 15 ml and 50 ml centrifuge tubes with conical bottom. Just push the tubes into the cavities and leave them. Unique design has an angular end to provide easy stacking for space saving purpose. Moulded in alpha numeric grid reference on the rack allows easy sample identification.
Manufactured from high density polypropylene. Due to their weights, they do not float in the water baths, not even in agitated water. These racks are supplied dismantled and can be easily assembled . Autoclavable. A moulded-in alpha-numeric grid reference on the top tier of the rack allows easy sample identification.
Autoclavable. Popular fraction collector plate-style rack. Easily load and transfer 80 tubes with 1.5 ml or 2.0 ml in a compact format (5 x 16 array). Polypropylene rack has moulded-in coordinates to aid organisation. Assorted colours.Dimensions (L x W x H): 225 x 67 x 28mm
Set of 5 colours: Blue, green, pink, yellow and orange. Autoclavable. Polypropylene rack has 96 wells for 0.5 ml microcentrifuge tubes on one side and 96 wells for 1.5 ml to 2.0 ml microcentrifuge tubes on the other side. Wells are arranged in standard 8 x 12 array. Handy lid snaps into place via tabs on each end of rack. Dimensions (L x W x H): 246 x 121 x 50 mm