Oxygen meter SD 315 Oxi
Product number:
4678221
Manufacturer:
Tintometer GmbH
Packaging information:
Weight:
1 kg
Description
The portable hand-held measuring instrument SD 315 Oxi meets the daily requirements for a robust and reliable instrument for the determination of dissolved oxygen in aqueous media. The Clark oxygen sensor with integrated temperature probe enables immediate measurements without time-consuming run-in time (polarisation time).
Scope of supply: Instrument, protective covering, electrode holder, carrying case, galvanic oxygen sensor, KOH refill electrolyte, spare membrane, calibration bottle with sponge, batteries, manual
- Simple calibration against air or according to DIN EN ISO 5814
- Alarm function with adjustable limits
- Automatic pressure and temperature compensation
- Auto Hold Function
- Automatic switch-off individually selectable from 1 to 120 min
- Backlit LCD display
- Sensor status display in % after each calibration
- Salinity correction
- Parameter: dissolved oxygen (O2), O2 concentration in mg / l, O2 saturation in %, temperature in °C / °F
- Battery status indicator
- Flexible stand at the rear allows the unit to be set up or fastened to a belt.
- Data transfer and evaluation via software possible
Scope of supply: Instrument, protective covering, electrode holder, carrying case, galvanic oxygen sensor, KOH refill electrolyte, spare membrane, calibration bottle with sponge, batteries, manual
| Hazardous Substance Data | |
| GHS | |
| Signal word | Gefahr |
| H-Satz | H290, H314 |
| P-Satz | P280, P301+P330+P331, P303+P361+P353, P305+P351+P338, P310 |
| UNNR | 1814 |
| SDS | Link |
Properties
| Cable length m: | 2.0 |
|---|---|
| GHS: | GHS05 |
| Manufacturer Article Number: | 724680 |
| Type: | SD 315 Oxi (Set 1) |
Skip product gallery
Dissolved oxygen meter FiveGo™ F4
From
€443.00*
Dissolved oxygen meter Seven2Go™ pro S9
From
€1,080.00*
Dissolved oxygen meter SevenExcellence™ S900 / S600
From
€3,350.00*
Oxygen meter SD 400 Oxi L
From
€460.30*
Accessories for Oxygen meter SD 400 Oxi
From
€44.50*
Portable dissolved oxygen meter Oxi 3205 Set 1
From
€1,657.00*
Oxygen meter Orion™ Pro Star DO213, BOD kit
From
€3,130.00*
Dissolved oxygen meter Seven2Go™ S4
From
€685.00*
Similar products
Portable dissolved oxygen meter for field work.Measurement made easy: A large, well-structured display, intuitive button arrangement and simple menu ensure measurements can be performed in just a few clicksErgonomic design for one handed operation: Thanks to its ergonomic design, handling the FiveGo™ is a comfortable experience. The foldable stand provides optimal viewing on flat surfacesScope of supply: F4-Meter: Meter onlyF4-Standard kit: Meter with LE621 sensorF4-Field kit: Meter with LE621 sensor, carrying caseSpecificationsMeasuring range (O2 Saturation):
Resolution:
Accuracy:0.1 ... 400 %
0.1 %
±1 %Measuring range (Temperature):
Resolution:
Accuracy:0 ... 50 °C
0.1 °C
±0.3 °CMeasuring range (O2concentration):
Resolution:
Accuracy:0.01 ... 45.00 mg/l (ppm)
0.01 mg/l
±1 %Temperature compensation:ATC and MTCCalibration:2 points, 100 % and 0 %Memory size:200 measurements, current calibrationDimensions (W x D x H):188 x 77 x 33 mmIP code:IP 67 (meter + sensor)
Portable professional model for dissolved oxygen measurement.New, intuitive menu structure with fast and easy T-Pad navigationRobust design with IP67 protection for use in harsh and demanding environmentsIntelligent Sensor Management (ISM®) functionality reduces the risk of errorsNew sunlight-proof screen guarantees screen readability even in direct sunlightNew StatusLight gives a fast, visual confirmation showing if the meter is ready to measure or notOperating support for 12 languages with information shown in complete words and sentenceUp to 2 calibration points and a choice of 2 predefined oxygen standardsAutomatic, manual and time dependant endpoint recordingData memory storage for 2000 GLP data points with weatherproof Micro-USB connection for data exportPower requirements: 4 x 1.5 V AA or 1.3 V NiMH accumulatorsScope of supply:S9-Meter: Includes instrument, LabX® direct pH, USB cable, electrode clip, base accessory, operating instructions, quick guide, test certificate, declaration of conformity, batteriesS9-Standard kit: As S9-Meter, but also with InLab® OptiOx™, zero oxygen tabletsS9-Field kit: As S9-Standard kit, but also with bottles for calibration, uGo™ carrying case, InLab® OptiOx™ with protective guardS9-BOD kit: As S9-Field kit, but including InLab® OptiOx™ (without protective guard), BOD adapter, BOD application noteSpecificationsDO Saturation
Measuring range:
Resolution:
Accuracy:
0.1 ... 500.0%
0.1
±10%Temperature
Measuring range:
Resolution:
Accuracy:
0.0 ... 50.0°C
0.1°C
±0.1°CDissolved Oxygen
Measuring range:
Resolution:0.01 ... 50.00mg/l (ppm)
0.01Accuracy:± 0.1mg/l in range 0 ... 8mg/l
± 0.2mg/l in range 8 ... 20mg/l
± 10% in range 20 ... 50mg/lPressure
Measuring range:
Resolution:
Accuracy:
500 ... 1100mbar
1
±2%Dimensions (W x D x H):222 x 70 x 35mm
The model S900 offers a bench-top solution with OptiOx™ technology: the optical measurement of dissolved oxygen. Thanks to OptiOx™, measuring dissolved oxygen is easier than ever before. For applications where the traditional polarographic measurement is preferred the S600-Kit is recommended. Optical oxygen measurement is superior to conventional technologies. OptiOx™ is fast, precise and produces highly reproducible results. Because of the optical measuring principle used, the oxygen is not chemically consumed during the measurement, which makes stirring the sample superfluous. The InLab OptiOx™ requires no polarization time, meaning you can start your measurement immediately. In addition, the whole measuring system has a high level of stability making calibration rarely necessary.Scope of supply:S900-Basic: Includes instrument, DO/BOD expansion unit, 2 blank expansion units, uPlace™ electrode holder, semitransparent cover, operating instructions, installation and quick guide, LabX® direct pH PC software, declaration of conformity, test certificateS900-Kit: As S900-Basic but with InLab® OptiOx™, guide to DO measurement, zero oxygen tabletsS900-BOD: As S900-Kit, also including BOD adapterS600-Kit: As S900-Kit, but with InLab® 605-ISM instead of InLab® OptiOx™SpecificationsMeasuring range (O2 Saturation):InLab® OptiOx™:
InLab® 605-ISM:
Resolution:0.0 ... 500 %
0.0 ... 600 %
0.1Measuring range (O2concentration)InLab® OptiOx™:
InLab® 605-ISM:
Resolution:0.000 ... 50 mg/l (ppm)
0.00 ... 99 mg/l (ppm)
0.001 / 0.01 / 0.1AccuracyInLab® OptiOx™:±0.1 mg/l from 0 to 8 mg/l
±0.2 mg/l from 8 to 20 mg/l
±10 % from 20 to 50 mg/lInLab® 605-ISM:±0.5 %Measuring range (Pressure):
Resolution:
Accuracy:500 ... 1100 mbar
1
±2Calibration points:2Sensor inputInLab® OptiOx™:
InLab® 605-ISM:MiniLTW (IP67)
BNCPressure compensation:Automatic / manual
Oxygen meter for use in sewage and water works, research and teaching as well as in aquaristics. High measuring accuracy and low maintenance, thanks to luminescence technology no electrolyte solution is required. The SD 400 Oxi L is ideally suited for the determination of "dilution BOD" due to the optimized probe for standard BOD bottles.Especially high measuring accuracy by luminescence technologyShort response time of the oxygen probeLow maintenance due to long-lasting oxygen probe and membrane headInflow to the oxygen probe is not necessary, the use of stirrers or manual stirring is no longer requiredIncludes software for extended and simplified data management with data logger functionBacklit LC display for dark environmentsScope of supply:SD 400 Oxi L (Set 1): Meter with 4 (AA) batteries, optical oxygen probe with 1.5 m cable, storage/calibration bottle, micro SD card with calibration data, software and manual (on Micro SD card), short manual, lanyard in caseSD 400 Oxi L (Set 2): as Set 1 but with optical oxygen probe with 3 m cableSD 400 Oxi L (Set 3): as Set 2 but with optical oxygen probe with 10 m cableSpecificationsO2 concentration:
Resolution:0 ... 50 mg/l
0.01 mg/lO2 saturation:
Resolution:0 ... 500 %
0.1 %O2 accuracy:
0 ... 200 % or 0 ... 20 mg/l:
200 % or 20 mg/l:
± 1,0 % or ± 0,1 mg/l, larger value applies
± 10 %O2 partial pressure:
Resolution:
Accuracy:51 ... 112 kPa
0.1 kPa
± 0.2 %Probe temperature:
Resolution:
Accuracy :-5 ... 50 °C
0.1 °C
± 0.2 °CMemory:Micro SD card, 1 GB, saving of over 10000 datasetsPower supply:Micro USB or 4 x AA batteriesDimensions (L x W x D):162 x 98 x 54 mmWeight:Approx. 314 gIP code:IP 67
Optical DO-probes with cable, incl. bottle for storage and calibration and Micro SD card with calibration data.Maintenance Kit consists of membrane cap and Micro SD card with software and calibration data.
Robust and easy to use dissolved oxygen meter for standard alkaline, or rechargeable, batteries. Menu-controlled with backlit graphics display for ease of use under all lighting conditions. Suitable for use in harsh environments.Scope of supply: Oxygen meter, case, galvanic DO sensor CellOx® 325, electrolyte, 3 x exchange membrane heads, stand, beaker, short instruction manual, batteries
Meter for accurate and reliable analysis of dissolved oxygen, barometric pressure and temperature. The Orion™ Pro Star features an intuitive user interface, enhanced data reporting and numerous functions. The on-screen setup wizard guides the user through important meter and measurement settings and provides on-screen tours and instructions for calibration, measurements, meter connections and electrode stand assembly. The ‘Secure Mode’ feature allows up to three administrators and 30 users individual account logins with password protection. Data can be saved as report files for easy viewing or CSV files and exported to a printer, computer or USB flash drive. The Orion™ Pro Star also supports bi-directional communication with remote commands to connect the meter to computer programs such as LIMS, HyperTerminal, PuTTY and other data collection software.Ergonomically angled 7-inch colour touchscreen displayDisplay can be operated with glovesSelectable measurement display format (basic, advanced or custom layout)‘Graph view’ displays the measured values in a curve diagram1- to 2-point calibration (oxygen saturation, temperature)1-point calibration (oxygen concentration, barometric pressure)Up to 10 methods can be stored per channelStores 10000 data log sets and 20 calibration logs per parameter with date and time to ensure GLP complianceDust- and water-resistant housing (IP 54)Scope of supply: Oxygen meter, electrode stand, AUTO-STIR polarographic BOD DO/ATC electrode with calibration sleeve (086030MD), polarographic DO electrode maintenance kit, USB flash drive, PC cable, universal power supply with plug adapter EU, UK, US, AUS and China
Portable routine model for dissolved oxygen measurement.New, intuitive menu structure with fast and easy T-Pad navigationRobust design with IP67 protection for use in harsh and demanding environmentsIntelligent Sensor Management (ISM®) functionality reduces the risk of errorsUp to 2 calibration points and a choice of 2 predefined oxygen standardsAutomatic, manual and time dependant endpoint recordingData memory storage for 200 data pointsPower requirements: 4 x 1.5 V AA or 1.3 V NiMH accumulators Supplied with:S4-Meter: Includes instrument, electrode clip, operating instructions, quick guide, test certificate, declaration of conformity, batteriesS4-Standard kit: As S4-Meter, but also with InLab 605-ISM and zero oxygen tabletsS4-Field kit: As S4-Standard kit, but also with bottles for calibration, uGo™ carrying caseSpecificationsMeasuring range (O2 Saturation):
Resolution:
Accuracy:0.1 ... 600.0%
0.1
±10%Measuring range (Temperature):
Resolution:
Accuracy:0.0 ... 60.0°C
0.1°C
±0.2°CMeasuring range (O2concentration):0.01 ... 99.99 mg/l (ppm)Accuracy (display):±0.2 mg/l in range 0 ... 15 mg/l
±10% in range 15 ... 60 mg/lMeasuring range (Pressure):
Resolution:
Accuracy:500 ... 1100 mbar
1
±2%Dimensions (W x D x H):222 x 70 x 35 mm