NMR tubes, length 100 mm, for Bruker MATCH™ system
Product number:
7673677
Manufacturer:
Hilgenberg GmbH
Packaging information:
Weight:
0.009 kg
Description
These NMR tubes were developed with the special length of exactly 100 mm and are thus specifically adjusted for the Bruker MATCH™ system.
Properties
| Ext. Ø: | 4.0 mm |
|---|---|
| Ext. Ø: | 4.0 mm ± 0.025 |
| Int. Ø: | 3.3 mm |
| Int. Ø: | 3.3 mm ± 0.025 |
| Length: | 100 mm |
| Manufacturer Article Number: | 2001725 |
| Tolerance ext. Ø: | 0.025 mm |
| Tolerance int. Ø: | 0.025 mm |
| Wall thickness: | 0.35 mm |
Skip product gallery
NMR tubes, 5 mm, DURAN®, Economic
From
€3.05*
NMR tubes, diameter 3 and 5 mm borosilicate glass 3.3, standard
From
€105.86*
NMR Tubes, 5 mm, Wilmad®, High Throughput
From
€138.20*
EPR sample tubes, quartz glass
From
€184.10*
NMR tubes, 3 and 5mm, borosilicate glass 3.3, KIMAX®-HQ
From
€59.10*
NMR Tubes, 5 mm, Wilmad, Precision
From
€56.40*
NMR Tubes 5 mm, Wilmad, Economy
From
€23.90*
Similar products
NMR tubes are available, according to requirement, in three accuracy classes. The correct tube can be selected depending on magnetic field and spin. The tubes are noteworthy for their close tolerances and accuracy, especially to their straightness, wall thickness and wall thickness distribution. Consequently, quick and accurate test results are achievable. With retrace code.The disposable for economical use in fully automatic sample dispensers or where high throughputs are involved.
The NMR tubes are produced with high precision. They are suitable for routine measurements, high-throughput measurements or NMR systems with autosampler at measurement frequencies up to 600 MHz. The tubes are manufactured from borosilicate glass 3.3 which is conform to USP Type I and ASTM E438, Type I, Class A. Please order closing caps separately.
The thin-walled high-throughput Wilmad® NMR tubes have an average camber of 60 microns to guarantee the clarity of the spectrum for small molecule (MW <250) samples up to 600 MHz. Designed for routine use in most low to mid field NMR spectrometers.Made from borosilicate glass, ASTM E438 Type 1 Class B standardCamber and concentricity values listed are the Total Indicator Reading (TIR)Includes disposable capsWG-1000-7-SJ is supplied with authentic Bruker SampleJet cap
These EPR tubes are manufactured from upmarket quartz glass with only slightest amounts of paramagnetic trace elements. The tubes are delivered single packed and sealed in plastic foil.
Our KIMAX®-HQ NMR tubes are our highest quality NMR tubes and are 100% gauged for wall thickness, concentricity and camber specifications.High-Quality NMR tubesAttached polyethylene capsSandblasted marking spotManufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Thin-walled Precision NMR tubes. To maximize Signal-Noise-Ratio, Precision NMR tubes have minimal paramagnetic impurities that would impact shimming. For experiments requiring critical shimming quality (high/ultrahigh field, nonspinning, multi-dimensional, multi-nuclei, DNP experiments and studies involving biological samples).Made from borosilicate glass, ASTM E438 Type 1 Class AHydrolytic class 1Inner surface is resistant to strong acid and base at ambient temperatureFor temperatures up to 230 °C and within a temperature step of 120 °CInclude disposable caps
The thin walled Wilmad Economy NMR tubes are designed for routine use in all NMR spectrometers. They fit tightly in any spinner turbine and have zero NMR background. For experiments with small organic molecules (Molecular Weight ~500) at ambient temperatures. Cooling/heating of these tubes may lead to breakage.Made from borosilicate glass, ASTM E438 Type 1 Class B standardCamber and concentricity values listed are the Total Indicator Reading (TIR)Includes disposable caps