Metal-cased heating mantles series KM-ME, with controller
Product number:
9642524
Manufacturer:
ISOHEAT GmbH
Packaging information:
Length:
285 mm
Width:
277 mm
Height:
220 mm
Weight:
2.583 kg
Description
LabHEAT® - Heating mantles for flasks, round bottom. Flexible glass yarn heating element in plastic coated, chemical-resistant metal housing with built-in power-on and heating zone switch, in addition equipped with a controller which allows a continuous adjustment of the heater power; max. heating element temperature 450 °C; 1.5 m power supply (earthed) cable and RCD (residual current detection).
Properties
| Dimensions (ØxH): | 220 x 190 mm |
|---|---|
| Height: | 190 mm |
| Manufacturer Article Number: | 92001000 |
| Max. temperature: | 450 °C |
| Max. voltage: | 230 V·AC |
| No. of heating points: | 1 |
| No. of heating zones: | 2 |
| Plug type: | EU |
| Power supply: | 230 V·AC |
| Rated capacity: | 300 W |
| Type of auxiliary energy: | Mains connection |
| Volume vessel: | 1000 ml |
| With stirring function: | No |
| Ø: | 220 mm |
| Ø vessel: | 131 mm |
Skip product gallery
From
€291.00*
From
€458.00*
Other customers also bought
ISOHEAT GmbH
ISOHEAT GmbH
Metal-cased heating mantles series KM-M, without controller
LabHEAT® - Heating mantles for flasks, round bottom. Flexible glass yarn heating element in plastic coated, chemical-resistant metal housing with built-in power-on and heating zone switch; max. heating element temperature 450 °C; 1.5 m power supply (earthed) cable and RCD (residual current detection).
ISOHEAT GmbH
ISOHEAT GmbH
Multi-size Heating Mantles, series KM-MPE for different sized round bottom flasks
LabHEAT®-Heating mantles for flasks, round bottom. Designed and technically identical to series KM-ME, but can be used for round flasks of three different sizes, max. heating element temperature 450 °C; 1.5 m power supply (earthed) cable and RCD (residual current detection), equipped with a controller which allows a continuous adjustment of power.
Skip product gallery
From
€23.40*
From
€484.00*
Accessories
ISOHEAT GmbH
ISOHEAT GmbH
Support clamp KM-SK
LabHEAT®-Accessories for metal-cased heating mantles and serial heating unit to fix support rods up to diameter 12 mm or to integrate the metal-cased heating mantles within support wall.
ISOHEAT GmbH
ISOHEAT GmbH
Laboratory regulator series KM-RX1000
LabHEAT®-regulator. Freely configurable electronical temperature regulator with two displays indicating the desired and actual values. PID self-optimisation, with ramp function, USB port, for external configuration. Pt-100 or thermocouples for temperatures up to 1200 °C, metal housing (H x W x D) 75 x 205 x 140 mm with fixed support clamp, switching power max. 2300 W (10A), 1.5m power supply (earthed) cable with plug. Nominal voltage 230 V AC.
Skip product gallery
Electronic heating mantles HM-200
From
€454.00*
Standard heating mantles series KM-G
From
€304.00*
Electronic multi-size heating mantles HM-200-V, V-shaped
From
€577.40*
Heating mantles Electrothermal® MHM-200
From
€3,390.50*
Metal-cased heating mantles KM-MEB series
From
€441.00*
Standard heating mantles series KM-GF
From
€431.00*
Standard heating mantles series KM-GH
From
€434.00*
Metal-cased heating mantles series KM-M, without controller
From
€291.00*
Similar products
Polypropylene outer case is resilient and chemically resistant. Highly efficient in heating up to a maximum element temperature of 450 °C. The flexible heating element is suspended in a thermal insulating cartridge to provide maximum heat transfer with minimum risk of flask breakage. Even at full power output, the exterior remains "cool-to-touch" due to good heating element insulation. All heating mantles have support clamp for rods of up to 12 mm diameter, and are double fused, with earth (ground) screen to protect the user from electric shocks.Spare heater cartridges are available on request.
LabHEAT®-Heating mantles for flasks, round bottom. Flexible glass yarn heating element, outer jacket in glass silk, with diam. 60 mm bottom out-let from 500 ml, max. heating element temperature 450 °C, 1.5 m power supply (earthed) cable with heating-zone switch and RCD (residual current detection).
Solid, with mesh stainless steel liner, which protects against fluid spills, with central aperture to accommodate round-bottom and pear-shaped flask and 60° funnels. For round bottom flasks, pear-shaped flasks and 60° funnels (Mantle is open at the bottom). Polypropylene outer case is resilient and chemically- resistant. Highly efficient in heating up to a maximum element temperature of 450 °C. Even at full power output, the exterior remains "cool-to-touch" due to good heating element insulation. All heating mantles have support clamp for rods of up to 12 mm diameter, and are double fused, with earth (ground) screen to protect the user from electric shocks.Spare heater cartridges are available on request.
Heating mantle has a "V"-shaped design for large, pear-shaped and round-bottom flasks. The bottom opening allows 60° funnels of various diameters to be accommodated. Coiled heating element provides optimal heat transfer. Control heat throughout the mantle using three separate electrical circuits (top, middle, and bottom), each controlled with its own dial switch.Cool-to-the-touch design with powder-coated aluminium casingIndicator lamps for "power on" and "heat on" operationScope of supply: Heating mantle, three sets of integrated support rod clamps, power cords with UK and EU plugs
With corrosion-resistant stainless steel heating bowl to protect against leaking liquid resulting of a broken flask.Increased working safety in the labPlastic-coated, chemically resistant metal housingPredrilled threaded hole on rear allows to fix the stativ clamp2 heating zonesWith built-in controller allows a continuous adjustment of power outletThermally insulated and earthedWith built-in heating zone switch and residual current detection (RCD)
LabHEAT®-Heating cover for reaction vessels. Flexible glass yarn heating element, outer jacket in glass silk, with Ø 60 mm bottom outlet from 500 ml, max. heating element temperature 450 °C, 1.5 m power supply (earthed) cable with heating-zone and RCD (residual current detection.
LabHEAT®-Heating mantles for flasks, round bottom. Designed identical to series KM-G, but the heating element is made of heat-resistant quartz yarn and permits a maximum temperature up to 900 °C; 1.5 m power supply (earthed) cable with heating-zone switch and RCD (residual current detection).
LabHEAT® - Heating mantles for flasks, round bottom. Flexible glass yarn heating element in plastic coated, chemical-resistant metal housing with built-in power-on and heating zone switch; max. heating element temperature 450 °C; 1.5 m power supply (earthed) cable and RCD (residual current detection).