Centrifugal filter JetSpin® with 2 ml centrifuge tube
Product number:
4712726
Manufacturer:
Guangzhou JET Bio-Filtration
Packaging information:
Description
Centrifugal filter, with microcentrifuge tube and PES membrane
The JetSpin® filter membranes are made from premium polyethersulfone (PES), offering low protein adsorption, rapid filtration speed, and high recovery rates. Their single/double-sided vertical filter structure and support rib design provide a larger filtration area, reduced dead volume, and enhanced structural stability, allowing for higher centrifugal force compatibility while minimizing
process losses.
Inner Filter: 0.5 ml, 5 ml, 15 ml
Centrifuge Tube: 2 ml, 15 ml, 50 ml
Molecular weight cutoff (MWCO): 3kDa, 5kDa, 10kDa, 30kDa, 50kDa, 100kDa,
Material Centrifuge tube: Polypropylene (PP)
Material tube cap: High-density polyethylene (HDPE)
Material filter: Methacrylate-butadiene-styrene (MBS)
Material filter membrane: Polyethersulfone (PES)
Centrifugal filter, with microcentrifuge tube and PES membrane
The JetSpin® filter membranes are made from premium polyethersulfone (PES), offering low protein adsorption, rapid filtration speed, and high recovery rates. Their single/double-sided vertical filter structure and support rib design provide a larger filtration area, reduced dead volume, and enhanced structural stability, allowing for higher centrifugal force compatibility while minimizing
process losses.
Inner Filter: 0.5 ml, 5 ml, 15 ml
Centrifuge Tube: 2 ml, 15 ml, 50 ml
Molecular weight cutoff (MWCO): 3kDa, 5kDa, 10kDa, 30kDa, 50kDa, 100kDa,
Material Centrifuge tube: Polypropylene (PP)
Material tube cap: High-density polyethylene (HDPE)
Material filter: Methacrylate-butadiene-styrene (MBS)
Material filter membrane: Polyethersulfone (PES)
- Single (0.5 ml) /Double-sided (5 ml, 15 ml) vertical filter structure provides an effective filtration area of up to 9.7 cm²
- Rapidly concentrates samples in 5 – 25 minutes, achieving a concentration factor exceeding 100-fold
- Minimal void volume, reduces sample loss during centrifugation
- Precise black graduations on the tube body with clear MWCO indicators, and writing area for easy marking
- Inner filter: 0.5 ml
- Centrifuge tube: 2 ml
- Pack of 12 x 25
Properties
| MWCO: | 30 kDa |
|---|---|
| Manufacturer Article Number: | FTT130105 |
| Material: | PP |
| Material membrane: | PES |
| Max. rcf: | 10000 x·g |
| Membrane surface: | 0.65 cm² |
| Sample volume fixed-angle rotor: | 0.5 ml |
Skip product gallery
LLG-Centrifuge tubes economy, PP
From
€105.10*
Centrifuge tubes, round bottom, AR glass®, ungraduated
From
€0.32*
Centrifuge tubes Nalgene™ Oak Ridge, PPCO, with sealing caps, PP
From
€17.20*
Centrifuge tubes, round bottom, DURAN®
From
€5.00*
Eppendorf Tubes® 5.0 mL, PP, with hinged lid
From
€46.20*
LLG-Microcentrifuge tubes, PP, with Safe-Lock lid
From
€13.17*
Centrifuge bottles Nalgene™, PP-copolymer
From
€11.80*
Test and Centrifuge Tubes Falcon®, PS and PP, with graduation
From
€112.00*
Nalgene™ Oak-Ridge centrifuge tubes, PP-copolymer
From
€8.45*
Centrifuge tubes, PP
From
€6.80*
Test and Centrifuge Tubes Falcon®, PS and PP
From
€78.00*
Similar products
With flat PE capsWith conical bottom (15 and 50 ml) or with self-standing bottom (50 ml)Easy-to-read black volume graduationsWith a large frosted writing areaEngraved graduation at the conical bottom of each tubeMax. rotate speed up to 12000 x g for conical bottom tubes and 6000 x g for self-standing tubesAutoclavable at 121 °C and freezable to -80 °CLeak-proofFree of pyrogensDNase/RNase-freeAseptically or sterileFor research and development only.
Maximum loading: 3500 x g rcf. Smooth rim, wall thickness: 2.0 mm.
Transparent. For use up to 50,000 x g in cooled and uncooled centrifuges (Cat. no. 9.315685 can be used up to 100,605 x g). PP sealing caps with silicone seal for additional leak protection when centrifugation at >10,000 x g or when centrifugation of hazardous substances.Round bottomGood mechanical strengthHigher chemical resistance than polycarbonateMultiple autoclavableLeak-proof
To DIN 58970 part 2. Glass Type I / neutral glass as per USP, EP and JP. Autoclavable.Maximum loading: 4000xg rcf.* Not to DIN.
Simple, practical and ergonomic single-hand operationLarge labelling areaCertified purity: Available in lot-tested and certified Eppendorf Quality, PCR clean, Sterile and Eppendorf Biopur® purity levelsMaximum safety and stability for centrifugation up to 25000 x gCompatible with accessories for conical 15 ml tubes - many existing adapters and racks can be usedHinged lid for minimized sample evaporation during storage and incubation in a wide range of temperatures from -86 °C to 80 °CFrom 80 °C on, please use tube clips (cat. no. 9.409 294)
Tip
LLG-Microcentrifuge tubes are versatile and suitable for general laboratory applications such as incubation, centrifugation, and storage of samples. With tight-fitting Safe-Lock lid, which prevents unintentional opening of the lid during centrifugation.Frosted labelling area on the lidLid membrane can be easily piercedEasy opening and closing with one handGraduation lines for visual volume controlRNase- and DNase-freeTemperature range -86 up to 121 °C
PP-copolymer with PP screw cap. Autoclavable.
Widely used and referenced in laboratory protocols.Round bottomDual position snap-cap, PE for easy handling as indicatedSterile, pyrogen-free (<0.1 EU/ ml)
PP-copolymer with PP screw cap. PPCO is more resistant to chemicals than PC. Autoclavable. When wet, the translucent test-tube enables observation of the contents. Can be used in refrigerated and unrefrigerated centrifuges at up to 50,000 x g rcf. Accessory sealing cap assemblies are available for all sizes.
Polypropylene tubes with very good thermal, mechanical and chemical stability. Fitted with screw-on closure. Packed in boxes or bags. With graduations and labelling area. Tubes are sterile, cytotoxicity-free, DNase/RNase- and human DNA-free.
Widely used and referenced in laboratory protocols.Round bottomDual position snap-cap, PE for easy handling as indicatedSterile, pyrogen-free (<0.1 EU/ ml, except for Cat. Nos. 6.281 047 and 6.253 079)