Cell culture flasks, treated, PS, sterile
Product number:
4675621
Manufacturer:
Guangzhou JET Bio-Filtration
Packaging information:
Weight:
9.5 kg
Description
These cell culture flasks with treated surfaces for the cultivation of adherent cells are available with different growth areas from 12.5 to 300 cm². Available with vented or plug-seal caps made from polyethylene. Vented caps contain a 0.22 µm hydrophobic filter to allow gas exchange and minimize risk of cross-contamination. Plug-seal caps can be used in closed systems, providing a liquid and gas sheer seal, but by simply unscrewing the cap one quarter of a turn, this cap can also be used in an open system.
Material: Polystyrene
- Innovative angled neck design offers good pipette and cell scraper access
- Upper triangular and wider base shape provides stability
- Stackable
- Special writing area near the neck
- Engraved graduation on both flask sides
- Sterilized by gamma irradiation
- Pyrogen-free
- Individually packed in resealable outer packaging with zip fastener
Material: Polystyrene
Properties
| Coating (Cell culture): | TC |
|---|---|
| Dimensions (WxLxH): | 81.5 x 152.5 x 35.2 mm |
| Growth surface: | 75 cm² |
| Height: | 35.2 mm |
| Length: | 152.5 mm |
| Manufacturer Article Number: | TCF011250 |
| Material: | PS |
| Material lid: | HDPE |
| Max. working volume: | 22.5 ml |
| Min. working volume: | 15.0 ml |
| Mouth: | oblique |
| Nominal capacity: | 250 ml |
| Pyrogen free: | Yes |
| RNase/DNase-free: | Yes |
| Sterile: | Yes |
| Type of closure: | Closed |
| Width: | 81.5 mm |
| Working volume: | 15.0 ... 22.5 ml |
Skip product gallery
LLG-Serological pipettes, PS, sterile
From
€46.90*
Disposable Erlenmeyer Flasks Nalgene™ with vented closure, PETG, sterile, with flat bottom
From
€111.80*
BRANDplates®, for Inserts, pureGrade™ S, PS
From
€123.90*
Multidishes, Nunc™ cell culture treated surface, PS, sterile
From
€284.50*
Cell Culture Dishes, Nunclon™Δ Surface, PS, treated, sterile, round
From
€153.70*
Freezing Aid for Cell Cultures, FreezerCell™
From
€116.60*
Microscope slide Lab-Tek™ Chamber Slide™ System, PS
From
€232.70*
Cell Culture Plates, treated, PS, sterile
From
€120.30*
Cell Culture Flasks DURAN® TILT
From
€12.30*
LLG-Cell strainers, Nylon, sterile
From
€97.00*
Cellstrainers EASYstrainers™, PP, sterile
From
€94.30*
Similar products
Tip
Serological pipettes from LLG are ideally suited for sterile serological and cell culture applications. Easy to read graduation scales facilitate volume measurement and dosing. All LLG serological pipettes are plugged, sterile, pyrogen-free and have an increased volume capacity through extra graduations.1 ml, 5 ml, 10 ml, 25 ml and 50 ml pipettes contain a bi-directional secondary graduation scale for precise dosingColour coded ringmark for easy volume identificationSingle packed in easy-to-open plastic/paper packagingAlso available as short-pipettes (5 ml, 10 ml and 25 ml) or wide-mouth pipette (10 ml)For research and development only.
With blue vented closure, the chance for cross contamination is reduced. Ideal for shaker and suspension cell culture, media preparation or storage. Made of light, crystal clear PETG. Molded-in graduations. Leak-proof HDPE closure has a hydrophobic 0.2 µm PTFE membrane that allows sterile air exchange. Flasks offer a 5-year shelf life, a 10-6 SAL, are non-pyrogenic and non-cytotoxic. Individually packaged for easy storage and handling.
Sterile. For manual and automated cell and tissue culture work.Non-treated surfaceCover with condensation ringsSide well access for easier pipetting and removing cover slipsPerfect positioning in the plates via guide ridgesManufactured according to the requirements in ANSI/SLAS Standards 1 and 4BIO-CERT® CELL CULTURE QUALITY: Free of human DNA, RNase, DNase, Pyrogens and non cytotoxic
4- to 48-well multidishes with Nunclon™Δ treated surface. 6-well plates also available with Poly-D-Lysine and Collagen I coating.Raised well rims lower the risk of cross contamination.Excellent optical quality. All available surface modifications are certified pyrogen-free and tested for both monolayerformation and cloning efficiency employing primary cells as well as repeating cell lines. Sterile. With lidMaterial dishes and lids: Polystyrene
Surface treated dishes for cell culture available in various sizes and formats are optically clear and suitable for microscopy. Nunclon™Δ surface modification is certified pyrogen-free and tested for both monolayer formation and cloning efficiency employing primary cells as well as repeating cell lines. With lid.
FreezerCell™ can be used for a variety of cell types, including stem cells, primary cells, cell lines and yeasts. The FreezerCell™ does not require any additives and only needs to be placed in an ultra deep freezer and the cooling runs at -1°C per minute. Fill the freezing aid with the cryotubes and freeze for approx. 3 hours at -80 °C. Then the samples are readyto transfer to a nitrogen tank. This gentle method ensures a high survival rate of the cells during the freezing process.No pre-cooling necessaryConsistent temperature distribution, even with partial loadingLid can be opened easily
Chamber slides eliminate the need for cell transfer prior to visualisation / staining. Upper structure can be removed when culturing is complete. Useful for viral and mycoplasma testing, chromosome studies, toxicity tests and immunocytology. Sterile. The chemically coated growth surface of the Lab-Tek™II-CC² Chamber Slide System mimics polylysine and provides binding sites optimal for fastidious cells (e.g. neurons).Material chamber: PolystyreneLab-Tek™: Sealant: Non-toxic medical grade silicone.Lab-Tek II™: Sealant, biocompatible acrylic adhesive.Lab-Tek II - CC²: modified glass slide, chemically coated to mimic polylysine.
These standard surface treated cell culture plates for the cultivation of adherent cells exhibit a reduced evaporation due to raised well rims and uniform rings on the lids.Single position lid reduces the risks of cross-contaminationsWells are labeled with alphanumeric code for easy identificationSterilized by gamma irradiationPyrogen-free
The smart, reusable bottle system for cell culture media preparation.DURAN® TILT is perfectly designed for making work in biosafety cabinets and clean hoods safer and easier. The innovative features of the DURAN® TILT bottle changes everything. The TILT bottle has two positions: upright for filter sterilization or storage, and tilted at 45° for pipetting.The innovative design enables both good aseptic and ergonomic practice.The GL 56 mouth has a 100 % bigger opening than the standard GL 45 mouth for easier pipetting.The ergonomically shaped GL 56 screw cap is easy to open and close. Made from a non-cytotoxic polymer.Vacuum resistant glass bottle for the safe filter sterilisation of media.Space saving shape for fridge storage and warming media in a water bathLow bottle height is practical in the biosafety cabinet.Tilted volume indicators for convenienceManufactured from DURAN® borosilicate 3.3 glass for reusability and lower whole life costs.Accessories please order separately.
Cell strainers are especially suited for the generation of homogenous single cell suspensions from tissue or primary cell lysates.Colour coded mesh sizeDesigned to fit into 50 ml tubesIndividually packagedHandle and mantle surface for improved aseptic handlingNylon meshPyrogen-freeFor research and development only.
Colour coded mesh sizeDesigned to fit into 50 ml tubesIndividually packaged, convenient blister packHandle and mantle surface for improved aseptic handlingVent opening for fast filtrationPET meshPyrogen-free
Skip product gallery
Universal drying oven LLG-uniOVEN 42 and LLG-uniOVEN 110
From
€1,359.90*
Customers also viewed
Microprocessor controlled universal drying oven with forced convection including two shelves. Each shelf of the uniOVEN 42 and uniOVEN 110 has a load capacity of 20 kg, the total load capacity of each unit is 50 kg. The maximum number of shelves is 7 for uniOVEN 42 and 10 for uniOVEN 110 with a distance of 40 mm between shelves.Quick and intuitive operationMicroprocessor control with integrated auto-diagnostic systemForced convection with fanDigital display for time and temperatureTimer: 1 minute to 99.9 h and continuousDelayed start timer: 1 minute to 99.9 hOutlet for vapour exhaustionAcoustical and visible information for end of programAcoustical and optical alarm at temperature differencesInterior made of stainless steelAdjustable over temperature protection at 300 °CTemperature accuracy: ±1 °C (at 70 °C)Temperature uniformity: ±2 °C (at 70 °C)Scope of supply: LLG-uniOVEN incl. 2 shelves